This is a continuation on the series of articles about the most important requirements in NFPA 72 National Fire alarm Code Book. Make sure to read the first article NICET Study Guide – NFPA 72 Chapter 4 Fundamentals of Fire Alarm. In this articles I will discus Heat Detectors and give you the most important code requirement that you must know about for the exam.
General Requirements for all types of initiating devices:
Nicet Level 1 is based on installation and maintenance tasks. In this post, I will try to give you the necessary information on what subjects and what books to study with in order for you to pass the Level 1 exam. Unfortunately, there is no one specific book for each exam level, it is based on different books and references along with the knowledge of different tasks. With this Nicet Level 1 Study Guide I will try to guide you successfully through these different books and reference while explaining the knowledge and skills that you will need for each task. In addition, I will give you a few practice exams questions to help you become more familiar with the type of questions you are likely to see on the exam.
Are you ready? Great! Here is what you can expect to learn in this post:
This video is about the NFPA 72, The National Fire Alarm Code reference book, and explains how to use this book during your study for NICET exams and also how to use it in the actual exam. I will be talking about how I organized my book and go over a sample NICET practice test question and explain how to find the answer using this book. I have included the transcript of the video at the bottom of this post.
One of the reference book recommended by Nicet for the fire alarm certification exam is the Electrical Safety Student Manual. The book is around 90 pages long and available for free on line through CDC website. I will try to summarize the book in this post.
According to the Bureau of labor Statistics Census of work related deaths, electrical hazards are the fifth leading cause of work-related deaths. Whenever you are working with power tools or electrical current, there is a risk of injury due to electrical hazards. These hazards can come in four main forms that include electrocution, burns, falls and electrical shock. So if you are working at home, or on a job site, it is important to recognize situations where there is risk of injury and take the necessary precautions to avoid an accident. The following guide will assist you in understanding how an injury occurs, recognizing potential hazards and suggestions for solving them.
This is the second post of the most important notes from NFPA 72 Chapter 4 – Fundamentals of Fire Alarm Systems. Be sure to read Part 1 of this chapter in previous post.
Equipment shall be capable to operate at 85% and 110 %of nameplate voltage.
Equipment Shall be capable to operate at temperature between 32 and 120 Degree Fahrenheit (0-49 Celsius).
Equipment shall be capable to operate at 85% relative humidity and 86 Degree ambient temperature.
in an areas that are not continuously occupied, an Automatic smoke detection shall be provide to protect fire alarm panels, NAC power extenders and Supervising Station transmitting equipment. [click to continue…]
These are few notes from my previous study that I have kept since my initial Level I NICET Certification Exam. They are the most important requirements in Chapter 4, Fundamentals of Fire Alarm Systems – NFPA 72 National Fire Alarm Code. I have revised and updated a few of the codes for the 2007 edition. These requirements should be read over and over until memorized. This post will be a first in a series that I will post regularly.
The Purpose of fire alarm system is to alert the occupants, to summon aid and to control fire safety functions.
Equipment shall be listed for the purpose for which it is used.
Fire alarm system plans and specifications shall be developed by persons who are experienced in design, installation and testing.
The NFPA 72, National Fire Alarm Code, is the most highly referenced and used guide by fire alarm system contractors, AHJ’s and anyone involved in the construction and fire industry. It is the standard on HOW things should be done when it comes to fire alarm systems. It covers the application, installation, location, performance, inspection, testing, and maintenance of the fire alarm systems and their components. The current edition of the code book is 2013, However as of today, NICET will test you on the 2007 edition and it is the only edition permitted in the exam room. [click to continue…]